Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: Ahmadtamimi on January 12, 2016, 12:55:51 AM

Title: Asking about model master X to A .mmg post processor
Post by: Ahmadtamimi on January 12, 2016, 12:55:51 AM

Hello

I face problem when export my rotary design from artcam to mach3
I but the finish depth 0.1 but it comes on gcode +11 and the safe z also increased
Anyone have idea ?
I thing my design size rong or something like that

Thanks

Title: Re: Asking about model master X to A .mmg post processor
Post by: fixittt on January 13, 2016, 07:35:52 AM

Just an FYI, we solved this problem and a few others over email.  topic can be closed.
It was more of a machine configuration error then an artcam post processor issue.  All is working as it should.

Title: Re: Asking about model master X to A .mmg post processor
Post by: Ahmadtamimi on January 13, 2016, 07:38:38 AM

My friend robert im the same person ahmad that you helped him yesterday, there is no problem now , thanks very much