Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: Azrael on May 10, 2007, 03:27:07 AM

Title: Mach 3 Turn G&M Code List
Post by: Azrael on May 10, 2007, 03:27:07 AM
Hi,
Were I can find List of G and M codes supported by Mach 3 Turn.

Regards
Title: Re: Mach 3 Turn G&M Code List
Post by: Graham Waterworth on May 10, 2007, 03:53:12 AM
In the manual or in mach itself.

Title: Re: Mach 3 Turn G&M Code List
Post by: Azrael on May 10, 2007, 03:58:16 AM
Hi,
Thanks for a such quick answer. Yes, I know where to find G & M code list for Mill, but it differs from the TURN codes.
Title: Re: Mach 3 Turn G&M Code List
Post by: Graham Waterworth on May 10, 2007, 04:02:01 AM
Here is the turn manual

http://www.artsoftcontrols.com/documentation/Using3Turn.pdf

Graham.
Title: Re: Mach 3 Turn G&M Code List
Post by: Azrael on May 10, 2007, 04:18:07 AM
Thanks