Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: birdfalcon on May 08, 2007, 10:43:23 AM

Title: LazyCam 2 Pro Turn Error?
Post by: birdfalcon on May 08, 2007, 10:43:23 AM

I have attached a couple of files. The dxf is from Autocad and the associated turn tap file generated by LazyCam 2.0x.

Mach 3 is hanging when trying to load the tap file.

LC is generating what looks like impossible k numbers in the gcode for Mach3 to process.

Apologies if this is already in hand for fixing or that my dxf is at fault.

Title: Re: LazyCam 2 Pro Turn Error?
Post by: Brian Barker on May 08, 2007, 12:39:25 PM

That is a known bug and is fixed for the next rev :) Should be out tonight or tomorrow.
Thanks
Brian