Machsupport Forum
Support => Forum suggestions and report forum problems. => Topic started by: birdfalcon on May 08, 2007, 09:29:03 AM
-
I have attached a couple of files. The dxf is from Autocad and the associated turn tap file generated by LazyCam 2.0x.
Mach 3 is hanging when trying to load the tap file.
LC is generating what looks like impossible k numbers in the gcode for Mach3 to process.
Apologies if this is already in hand for fixing or that my dxf is at fault.
-
Hi,
this is a known bug and will be fixed for the next update, should not be long.
Graham.