Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: lethang85 on October 27, 2015, 04:09:56 AM

Title: Velocity in Gcode G0
Post by: lethang85 on October 27, 2015, 04:09:56 AM
Hello,

I have 4 axis:
Linear axes: X,Y,Z, motor tuning velocity: Vx,Vy,Vz
Rotational Axes: A, , motor tuning velocity: Vx,Vy,Vz

How much the feedrate in GCode G0 X..Y..Z...A  Mach3?


Rgs

Title: Re: Velocity in Gcode G0
Post by: magicniner on October 27, 2015, 05:49:58 AM
Click the G-Codes button on the main screen then click G0 for a fairly detailed description of it's function and use,
Regards,
Nick
Title: Re: Velocity in Gcode G0
Post by: BluePinnacle on November 01, 2015, 04:40:12 PM
G0 is for rapid positioning only. It's not for cutting. Still read the manual though.