Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: stephanisk on October 23, 2015, 10:36:15 AM
-
Hello everyone, since shortly I am part of the mach3 milling community and happy about this. :)
Now my problem is following. Someone is writing me a postprocessor but his english is the worst ever. So he asks me for the following.
"For your Mach3 need parameters indexed. It should set the parameters for indexed.
I need example NC.Program - From supplier Mach3 get."
Does anyone understand what the hell he would like me to send him, cause I don't have a clue.
Postpro is for solidcam. And it seems he programmed for simultaneously which ment I couldn't set 3 coordinate systems to side drill with a rotary attachment on the spindle. So he needs to change it to indexed. Whatever that may mean... . anyway this is what he send me, so please help what do I sooooo
Thanks for your help.
Stephane
-
I could guess what he needs but that would not help. Do you have a picture of the machine setup to do whatever process you want it to do. A picture can be worth a thousand words OR at least a hundred questions.
You could also just send him a link to the Mach3 User manual. THAT should give him anything he needs to write a post.
(;-) TP
-
Hello,
He is asking me for the Zero transformation points between the different coordinate systems in mach3
"Not good transformation zero points. I, I gotta find it somewhere example. "
Anyone knows.
Thx
-
One would think that SolidCam would provide post processor if you are licensed user.
Just for consideration:
In conversation or communication with third party support coming from a foreign individual / country I always say that I am hard of hearing and have difficulty
with accents and then request an English speaking person be provided to converse with. I have yet to be turned down on the request by any "reputable"
company.
RICH
-
I hear you!!!!!! absolutely, yet one only learns the hard way.