Machsupport Forum

Third party software and hardware support forums. => SmoothStepper USB => Topic started by: desertland on August 19, 2015, 12:59:38 PM

Title: Run 2 machines, one ess and one printer port?
Post by: desertland on August 19, 2015, 12:59:38 PM

My first cnc machine runs with ess. Am looking at a second one but it requires running from the printer port. When I make a new profile for the second machine will I get an option to select the printer port during set up? Reason I ask is I remember selecting the "don't ask me this again" for this:
(http://www.cncrouterparts.com/images/ess/ESS_Selection.jpg)
Does it apply only to that machine profile? or for Mach3 in general? If so how to I un select it so I get that pop up again?

Title: Re: Run 2 machines, one ess and one printer port?
Post by: rdean on August 19, 2015, 07:19:34 PM

Function Cfgs at the top of the screen then Reset Device Sel...  Restart mach3 and it will ask again.

Ray

Title: Re: Run 2 machines, one ess and one printer port?
Post by: desertland on August 19, 2015, 07:24:57 PM

Thanks!  Saw that in the menu but was not sure if that was the right button.