Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: blackrat6355 on May 01, 2007, 03:13:07 PM

Title: MaxNC15 CL2 Mach3 working xml file
Post by: blackrat6355 on May 01, 2007, 03:13:07 PM

Greetings all!

For those of you that have a MaxNC15 CL2 mill that was purchased in mid 2001, I have a working xml file for it. :)

I must say many thanks to Brian and some of the other groups out there for their help.

Send me your email address and I'll send you a copy of the xml file.

This is for the latest lockdown version of Mach3.........

Title: Re: MaxNC15 CL2 Mach3 working xml file
Post by: Brian Barker on May 02, 2007, 10:52:02 PM

Thank you for the help and I think you will get a few Emails for your XML over time :)

Thanks
Brian

Title: Re: MaxNC15 CL2 Mach3 working xml file
Post by: nickb on August 21, 2007, 02:42:22 AM

Hi,

I am really interested in this xml. My machine is the MaxNC 15CL2 and it was purchased in mid 2001. So if you can tell me a link to download it or send it to my email, I will be able to test the mach3 software!

I will also send you a PM.

Title: Re: MaxNC15 CL2 Mach3 working xml file
Post by: enytned1 on December 29, 2007, 02:21:09 AM

I have a 2004-2005 Maxnc 15cl.  Could you please send me the XML file you have for this type of machine?

Thank you,
Alex

Title: Re: MaxNC15 CL2 Mach3 working xml file
Post by: Pzak on February 08, 2008, 11:19:48 AM

I have a Max NC 15CL 2005.  Could I get the XML file as well?

Title: Re: MaxNC15 CL2 Mach3 working xml file
Post by: Brian Barker on February 08, 2008, 11:43:04 AM

This is the best that I can give you :
ftp://www.artsoftcontrols.com/XMLs

Thanks
Brian

Title: Re: MaxNC15 CL2 Mach3 working xml file
Post by: Greasemonkey420 on January 03, 2021, 01:36:22 AM

Hello, New here but have been searching high & Low, reading anything & everything  MAXNC 15 CL2...
  If the Person(s) who offered the CL2 xml
 File Happens to be reading this, Please send one to me, not sure how to PM you and not sure how to email you from here... If you got your antennas up??? If at all possible??? You would definitely be an Everyday Hero, 1 more time!!! Thx, Mike @ NUTZ N BOLTZ
 sitdwnhldon@gmail.com
 Heres mine...