Machsupport Forum
G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: vmax549 on March 06, 2006, 07:10:24 PM
-
Brian when you get a minute ;D Open this DXF file and see if it looks normal for LCAM. Enclosed is a screenshot of how it loads for me. Thanks Terry
-
Hmm, looks like a nice laser, light show.
-
I didn't get all that ... But it did show me a few other problems :) thank you for the file Terry
-
Any Idea on how to make it work. It is a very simple file??? I am running LCAM on my office putor that has Mach installed WITHOUT the driver, will that make a difference on the output??? Terry
-
Here is what the part looks like. Terry
-
Hard telling what the problem is at this time... I am going to get the other problems that I can see first but after that I may need you to do a little testing for me. :)
-
My turn. I have recently finished this DXF for a big part 1220 x 2440 mm ( Maybe the part size is way too big for LC yet ?)
I thought I would give LC a true test, I want to prove how well it works by showing something that it cut.
Unfortunately the file is not displayed in the view window, but is shown in the settings windows far right.
If you want another DXF to tes you can try this one. I am not asking for a fix, I have an alternative method, but just thought you might be interested.
-
I found the problem with Terry's file and it is the points... I am going to try to get the Drilling working in the next few days. this should fix a few of the odd problems that we have been haveing