Machsupport Forum

Third party software and hardware support forums. => Newfangled Mill Wizard => Topic started by: Garry F on July 04, 2015, 07:18:53 PM

Title: Tabs
Post by: Garry F on July 04, 2015, 07:18:53 PM

Is there any easy way to add tabs to Mill Wizard. I use mostly a router and tabs are very handy. I have looked and don't see a way do do this easily.
Garry

Title: Re: Tabs
Post by: Ron Ginger on July 04, 2015, 10:16:51 PM

No, there are no tab functions in the wizards. The next plan is to do a set specifically for routers, so I am collecting ideas now for what they should include.

Title: Re: Tabs
Post by: Garry F on July 05, 2015, 12:04:07 AM

Thanks Ron be watching for the router version.

Title: Re: Tabs
Post by: CNCharly on February 03, 2018, 07:58:56 AM

I want to raise up this subject. Tabs are quite important to safe the workpiece and the tool at the very last step of a mill process. Please restart thinking on it.
Thanks
CNCharly