Machsupport Forum

Third party software and hardware support forums. => LazyTurn => Topic started by: jerry1 on July 01, 2015, 10:58:02 AM

Title: LazyTurn
Post by: jerry1 on July 01, 2015, 10:58:02 AM

I have downloaded rev 8 of the manual, version 3.00 of LazyCam and version 1.1 of Lazyturn. Cannot find the links to upgrade LazyCam to 3.02 or what ever is the latest version of LazyTurn.
Can somebody help me find  the proper links?
Thankyou

Title: Re: LazyTurn
Post by: RICH on July 01, 2015, 11:57:33 AM

I believe the latest version of LazyCam is installed with Mach3 installation if you so choose, and would recommend it.
See page 4 of the LazyCam Manual.
Better yet see page 6 of the Lazyturn Manual.

RICH

Title: Re: LazyTurn
Post by: jerry1 on July 01, 2015, 05:09:53 PM

I have done all of the above. LazyCam 3.00.2 installed. Also installed LazyTurn and it is version 1.1. Is this the latest version of Lazyturn?
Thank you

Title: Re: LazyTurn
Post by: RICH on July 01, 2015, 09:24:58 PM

Yes.

RICH