Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: GMcG on June 30, 2015, 08:23:00 AM

Title: Spindle Speed problem
Post by: GMcG on June 30, 2015, 08:23:00 AM

This is my first post so I am hopeful for some help.  I just encountered a problem with Mach 3 interface with my Precision Matthews PM 30 mill.  When I highlight the S DRO and type in any speed, the numbers appear in the DRO box but as soon as I hit the "enter" key the number changes to a -1 value. I haven't intentionally changed any configuration settings.  Any help would be appreciated.

Thanks
GMcG

Title: Spindle Speed problem
Post by: JohnHaine on July 08, 2015, 06:58:18 PM

Try return instead of enter...


Sent from my iPad using Tapatalk