Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: xx1180 on May 14, 2015, 11:22:53 AM

Title: pocket lettering
Post by: xx1180 on May 14, 2015, 11:22:53 AM

can some one please tell me the easiest programme to use for doing pocket letters and also to pocket around the letters so that they are the high point

Title: Re: pocket lettering
Post by: Overloaded on May 14, 2015, 11:33:05 AM

SheetCam is good.
 Vectric is good too, easy to use, great support .... but a bit pricey.