Machsupport Forum

G-Code, CAD, and CAM => LazyCam (Beta) => Topic started by: IZ0FIC on April 13, 2007, 05:17:12 AM

Title: I HAVE A PROBLEM "gldraw1"
Post by: IZ0FIC on April 13, 2007, 05:17:12 AM

Hello. I have a problem whit LazyCam. I insert the file .dxf in the program, select the push-button Set Layer Depth and appears the written "Unrecoverable error in the file gldraw1 contacts artsoft". My PC is an Athlon 2.0 Ghz 512 M ram, video card on board whit 128 M ram. The program works well on an other PC Pentium Intel 2,8 G. Why this problem? Best regards Luca.

Title: Re: I HAVE A PROBLEM "gldraw1"
Post by: Chip on April 13, 2007, 06:40:19 PM

Hi, Luca

I'v had the same problem on my computer, it's some sort of video driver problem so-thy say.

Just enter the values in the right lower "Selected Layer" window, Lot's of changes to LC soon.

Hope this Helps, Chip

Title: Re: I HAVE A PROBLEM "gldraw1"
Post by: Brian Barker on April 14, 2007, 09:54:53 PM

We hope to have all that fixed with the new interface!

Thank you for telling us about the problem
Brian