Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: CNC Junkie on January 18, 2015, 11:43:46 AM

Title: Dolphin CAD-CAM
Post by: CNC Junkie on January 18, 2015, 11:43:46 AM

I've been using Dolphin with my old Bridgeport, but am looking at getting a 2 axis Lathe witth Mach3. I've noticed a couple of different posts. Which one works best?

Title: Re: Dolphin CAD-CAM
Post by: RICH on January 18, 2015, 03:29:42 PM

Quote

I've noticed a couple of different posts. Which one works best?

I assume that your using Mach and you are meaning Dolphin pp for the lathe.
In that case there are two for Mach3, one for radius and one for diameter for revisions 10 & 11.

RICH

Title: Re: Dolphin CAD-CAM
Post by: CNC Junkie on February 19, 2015, 07:59:51 PM

Thanks Rich. I got squared away. You were correct, one of radius and another for diameter. I am using the latest, I think 13?