Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: gormbo on January 17, 2015, 07:03:19 PM

Title: Need Help With NC Studio to Mach 3 conversion
Post by: gormbo on January 17, 2015, 07:03:19 PM

I am new to the world of cnc and have bought a J Cut 25s I want to convert it to run on Mach 3. I have replaced the BOB with a UG08 and UC300 from CNC 4 You to run from a Windows XP Laptop with a usb port. I have the rewiring part finished and installed Mach 3 and the drivers for the UC300 but I can't get the machine to move on any axis. I would really appreciate any help as i have tried everything I can think of ???

Thank you in advance.

Title: Re: Need Help With NC Studio to Mach 3 conversion
Post by: RICH on January 17, 2015, 08:53:33 PM

Not familar with the UC300, but, do a search on it and you will find some posts about using that controller.
The posts were rather recent and some users have had problems wih it .

You may also want to try  the driver test for that laptop and see how well it will works with Mach.

RICH