Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: dsx on January 15, 2015, 06:40:40 PM

Title: need help please. only one of the three motors work cnc 3020b
Post by: dsx on January 15, 2015, 06:40:40 PM

I got a 3020b cnc I followed the instructions but only z axis is working and the y axis is not selflocked but x axis is but doesn't move in jog .but when I looked at the screen the axis numbers change when pressing the axises on the jog handle. Could some one please help. Thanks

Title: Re: need help please. only one of the three motors work cnc 3020b
Post by: Tweakie.CNC on January 17, 2015, 06:54:37 AM

Hi Dsx,

Please contact the supplier where you obtained your 3020b for backup and support in resolving this problem.

Tweakie.

Title: Re: need help please. only one of the three motors work cnc 3020b
Post by: Mike Irvin on January 28, 2015, 12:38:01 AM

Set up "enable 1"  to pin   14 port 1
Mike Irvin