Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: c30232 on December 24, 2014, 10:03:03 PM

Title: Hotkey to JOG A axis
Post by: c30232 on December 24, 2014, 10:03:03 PM

I am able to jog A-- with a screen button . . . no issues.  However, when I assign a hotkey or keys the jog runs continuously.  That is, when key activated the axis will runaway even when the keys are lifted.  I have tried several keys or combinations. Please explain why this occurs.  Thanks!!