Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: Big Pop on December 09, 2014, 08:57:42 AM

Title: Soft limit and homing Problem
Post by: Big Pop on December 09, 2014, 08:57:42 AM

I am having a problem with Homing.  When the machine hits the homing limits it will not back off the limits.  If I hit the reference home button it homes again and moves closer to the table limits.  It appears that it is backing off in the wrong direction.  Nay suggestions

Title: Re: Soft limit and homing Problem
Post by: Hood on December 09, 2014, 07:00:37 PM

Try setting the Active Low setting to the opposite of what it is now. If that doesnt help then attach your xml and I will have a look.
Hood