Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: cncfreakcncfrea on November 13, 2014, 11:32:11 PM

Title: MB Asrock AM1B-ITX + C10
Post by: cncfreakcncfrea on November 13, 2014, 11:32:11 PM

Hi,
    I'm replacing my cnc lathe MB to Asrock AM1B-ITX, this board has a LPT port on board but I'm having problem getting this port to talk to C10. Previous MB had no problem is just a little bit old.
I checked the Bios settings in AM1B-ITX, Pararellel port is enabled, Device mode = Normal ( other 3 options = Bi-directional, ECP and EPP 1.9 mode, ECP and EPP 1.7 mode). Reload pc, enter Mach3 jog xyz result = no movement. DC servo are energized/locked.
Images:
(http://i1204.photobucket.com/albums/bb407/cncfreakcncfreak/BVB25L%20cnc%20conversion/Asrock%20AM1B-ITX/IMG_7709_zps2c6a85bb.jpg) (http://s1204.photobucket.com/user/cncfreakcncfreak/media/BVB25L%20cnc%20conversion/Asrock%20AM1B-ITX/IMG_7709_zps2c6a85bb.jpg.html)

(http://i1204.photobucket.com/albums/bb407/cncfreakcncfreak/BVB25L%20cnc%20conversion/Asrock%20AM1B-ITX/IMG_7710_zpsac75eb84.jpg) (http://s1204.photobucket.com/user/cncfreakcncfreak/media/BVB25L%20cnc%20conversion/Asrock%20AM1B-ITX/IMG_7710_zpsac75eb84.jpg.html)

(http://i1204.photobucket.com/albums/bb407/cncfreakcncfreak/BVB25L%20cnc%20conversion/Asrock%20AM1B-ITX/IMG_7712_zpse6cb5ed8.jpg) (http://s1204.photobucket.com/user/cncfreakcncfreak/media/BVB25L%20cnc%20conversion/Asrock%20AM1B-ITX/IMG_7712_zpse6cb5ed8.jpg.html)

Anyone experienced this before, and how did you overcome this problem?


thanks,

Title: Re: MB Asrock AM1B-ITX + C10
Post by: cncfreakcncfrea on November 16, 2014, 03:35:47 AM

Found some answer from other forum:
http://www.kellyware.com/kwforum/discus/messages/3/2863.html?1370554176
I re-installed the OS to Win7 Pro 32 bit, now is all working.