Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: hive8 on September 29, 2014, 06:37:15 PM

Title: Mach3 Pulse Frequency where to change
Post by: hive8 on September 29, 2014, 06:37:15 PM

I wanted to change the pulse frequency to 60kHz. i ran the test and system is perfect stable. I checked everywhere but was not able to find a setting to change it, please can someone let me know where and how i can change it.

Title: Re: Mach3 Pulse Frequency where to change
Post by: RICH on September 29, 2014, 06:53:59 PM

CONFIG>PORTS & PINS > KERNAL SPEED

RICH

Title: Re: Mach3 Pulse Frequency where to change
Post by: hive8 on September 29, 2014, 09:41:56 PM

Quote from: RICH on September 29, 2014, 06:53:59 PM

CONFIG>PORTS & PINS > KERNAL SPEED

RICH

Great that worked flawless