Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: pelletman on September 06, 2014, 11:41:19 PM

Title: gcode and probing
Post by: pelletman on September 06, 2014, 11:41:19 PM

Hello everyone,
I just purchased a probe I have mach3  for many years. I have the old digitizing program installed using Microsoft XL my question is if I ever get the probe working after I use probing wizard will this make a gcode to run my router to duplicate the parts. Or do I need a different program to turn that digitizing into GCode. Any help will be greatly appreciated



Thanks Tom