Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: 3rdEyeRish on September 06, 2014, 01:55:52 PM

Title: Mach 3 won't load entire g-code?!?
Post by: 3rdEyeRish on September 06, 2014, 01:55:52 PM

My cam software will save it all but when I load it into mach3 it won't have but a 3rd of it.

Title: Re: Mach 3 won't load entire g-code?!?
Post by: Davek0974 on September 06, 2014, 02:34:03 PM

Is it licensed?

Think I read somewhere that unlicensed is limited to 500 lines.

Title: Re: Mach 3 won't load entire g-code?!?
Post by: 3rdEyeRish on September 06, 2014, 02:35:51 PM

Nope it's the demo. It's like 2500 lines. Guess I'll have patch in at 2500 sets. ..