Machsupport Forum

*****VIDEOS***** => *****VIDEOS***** => Topic started by: chrisjh on July 03, 2014, 01:03:16 AM

Title: Cutting Steel Dovetails with Mach3
Post by: chrisjh on July 03, 2014, 01:03:16 AM

Some Generic QCTP Steel Toolholder Dovetails being cut with Mach3.

https://www.youtube.com/watch?v=NKk6e-_zMJ4&list=UUH2jXGbTHQPG5XGYQ9FYxDA

Regards

Chrisjh

Title: Re: Cutting Steel Dovetails with Mach3
Post by: hoochhenry on February 22, 2018, 06:07:19 PM

nice job is the a mach 3 code for the part

Title: Re: Cutting Steel Dovetails with Mach3
Post by: Chaoticone on February 22, 2018, 08:36:42 PM

Good job!  :)