Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: ianmould on July 02, 2014, 02:58:00 PM

Title: profiles
Post by: ianmould on July 02, 2014, 02:58:00 PM

can anybody help as i am bamboozled . I brought a pc cnc mill which I am running on mach 3 with meshcam as g code generator . All I want to do is upload 2d animal sillouettes and cut them out as profiles and not machine them as a 3d object . Is this possible ?

ian

Title: Re: profiles
Post by: RICH on July 02, 2014, 04:44:15 PM

ian,
MeshCam can open a 2d dxf. You will find info on how to use Meshcam on it's site.

RICH