Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: buyer1 on May 12, 2014, 01:57:16 PM

Title: kicking tires on Mach3 + Bridgeport SeriesII
Post by: buyer1 on May 12, 2014, 01:57:16 PM

I am going to look at a for sale Bridgeport Series II mill that was retrofitted with MACH3 today.  If anyone could chime in on things to look for that would show a system is setup well/correctly I would greatly appreciate it.  Does there exist a log file I could quickly view to get statistics on machine history?  Thanks!

Title: Re: kicking tires on Mach3 + Bridgeport SeriesII
Post by: Hood on May 13, 2014, 03:14:36 AM

My concern would not be how well Mach is set up as that can be easily and quickly   changed if it is not.
What I would be looking at is how well the retrofit has been carried out, what components have been used and is there any wiring diagrams of the the retrofit so I could troubleshoot in future.

Hood