Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: druckgott on May 02, 2014, 07:06:13 AM

Title: reset Button somtimes Hits out
Post by: druckgott on May 02, 2014, 07:06:13 AM

hallo, somtimes the reset bitten jumps out on my mach3, so if the mach3 ne is not driving it says something with the trigger. but only if the machine is ständig still.

Title: Re: reset Button somtimes Hits out
Post by: Hood on May 03, 2014, 06:04:00 PM

Sorry dont really understand what you are meaning, can you try and make things clearer please.
Hood

Title: Re: reset Button somtimes Hits out
Post by: Davek0974 on May 04, 2014, 04:20:08 AM

Are you meaning the reset button on the screen starts flashing red at random times when the machine is idle?

Could be a loose wire in the e-stop circuit or something interfering etc, does it never do it when running?

Title: Re: reset Button somtimes Hits out
Post by: Fastest1 on May 04, 2014, 09:10:55 AM

You are suffering from a noise condition. Raise the debounce level in the general config page. Not the index debounce.