Machsupport Forum

Mach Discussion => VB and the development of wizards => Topic started by: xjdubber on March 08, 2014, 08:24:04 PM

Title: Jog & Teach
Post by: xjdubber on March 08, 2014, 08:24:04 PM

Hi All,

Ive been searching and trying a few diffrent things to do a Jog and teach, I need to record positions as the jogging happens. So far what i have tried has not been completely succesfull. I also looked at the copycat wizzard. Doest look like it actually teaches as you jog. Anyone have any ideas?

Title: Re: Jog & Teach
Post by: Overloaded on March 08, 2014, 09:03:31 PM

Teaching works well from MDIs.
If you'd rather jog, try Brian's J-Code plugin, it worke pretty keen.
On the plugins dwnld page.
Russ

Title: Re: Jog & Teach
Post by: xjdubber on March 08, 2014, 10:26:57 PM

This is for a spinning lathe application all points have to be taught. the Jcode is very promising is there a way to have mcodes recorded with the file?

Title: Re: Jog & Teach
Post by: Overloaded on March 08, 2014, 10:46:21 PM

There is a video that might help, but you might need to insert the M's manually.
Russ