Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: thirty7 on March 07, 2007, 06:17:16 PM

Title: CNC_Toolkit 2 Mach3 problems
Post by: thirty7 on March 07, 2007, 06:17:16 PM

Hello
I have some trouble bringing in tool paths from CNC_Toolkit, they look very nice in Gmax but then?
It seems like a lot of the code get lost in Mach3. Any idea where I go wrong ?
Thankful for any advice.
/gunnars

Title: Re: CNC_Toolkit 2 Mach3 problems
Post by: Graham Waterworth on March 08, 2007, 04:52:09 AM

If you are running the demo version you are limited to 1000 lines of g-code.

If not then have you tried changing the IJ INC/ABS mode.

Graham.

Title: Re: CNC_Toolkit 2 Mach3 problems
Post by: thirty7 on March 08, 2007, 07:13:59 AM

I'm not in demo mode.
I have tested the IJ INC/ABS mode but no difference.
I post my file.
/gunnars

Title: Re: CNC_Toolkit 2 Mach3 problems
Post by: Graham Waterworth on March 08, 2007, 08:32:50 AM

My sim shows it as mach dose, it looks like the code is wrong to me.

Can you post an IGES file of the part.

Graham

Title: Re: CNC_Toolkit 2 Mach3 problems
Post by: thirty7 on March 09, 2007, 02:40:48 PM

Here is the iges, originally it is a stl.
/gunnars