Machsupport Forum

Mach Discussion => Brains Development => Topic started by: dbcoop11 on January 17, 2014, 04:59:02 PM

Title: Using multiple input lobe
Post by: dbcoop11 on January 17, 2014, 04:59:02 PM

On two of my three computers here I cannot select more than one input at a time for the purpose of and/or multiple input lobe. I have tried various things, even reinstalling Mach, but only am able to select one input at a time. Any help would be appreciated, Dave

Title: Re: Using multiple input lobe
Post by: ptontiger on April 04, 2016, 07:57:27 AM

I'm having the same problem.  Can't select multiple inputs in a brain. Anybody figure this out?  Thanks.

Title: Re: Using multiple input lobe
Post by: ptontiger on April 04, 2016, 11:50:16 AM

Figured it out.  I had to create a No-operation lobe for each of the inputs I wanted to combine.  Then I could select multiple lobes and create a second level lobe to perform an AND operation.