Machsupport Forum
Mach Discussion => General Mach Discussion => Topic started by: Joeroth1 on December 21, 2013, 01:40:31 AM
-
Hello All,
I have recently purchased a single spindle 4x8 router. I have no documentation for the machine. I am slowly muddling my way through the configuration but would love to pay someone to help expedite the process. I am able to jog all the axis's. I do think I have the correct tuning for the stepper motors. I am a little unsure how to assign the proper communications to the limit switches. If I jog the x axis till it touches the limit, is this the x-- absolute 0 or x home?. I also need some understanding on how the spindle is setup to be controlled by the mach. I would be grateful if someone who has configured a 3 axis machine from start to finish could. walk me through a sequence. I have been searching and reading this forum and watching the tutorials and have made progress. I could cut the configuration time down considerably with some knowledgeable guidance. In the event that there is not a local expert. Could someone please offer me how they went through their initial setup? Hood has been very insightful, However I don't think he wants to come to New Jersey to aid in my setup. Any insight is greatly appreciated-Thanks-Joe
-
where in NJ ????
-
I am located in Berkeley Heights Nj