Machsupport Forum

Third party software and hardware support forums. => Galil => Topic started by: the_kop on December 05, 2013, 02:19:56 AM

Title: movement is not smooth
Post by: the_kop on December 05, 2013, 02:19:56 AM
I have a problem for galil 21xx + Mach3.
1. Install Mach3 V.3.043.066 on win xp2007.
2.install plugin galil 4.5
This a problem
When I run the G code (attach file) When tool moves along the curve, why machines are so spastic (or movement is not smooth), I suspect that when the run g code first, it will not be a problem. but to run g code for a long time (about 30 minutes) is not smooth moves.
  But the same g code to control fanuc it Ok.

thank you

udom
Title: Re: movement is not smooth
Post by: the_kop on December 05, 2013, 02:20:41 AM
attach file
Title: Re: movement is not smooth
Post by: the_kop on December 05, 2013, 02:33:02 AM
image for g code
Title: Re: movement is not smooth
Post by: the_kop on December 14, 2013, 10:34:06 AM
Hi.

Please help me
I am still not resolved


Thank you

udom

Title: Re: movement is not smooth
Post by: cncalex on December 15, 2013, 08:29:40 AM
Hi,

try using CV ( G64 ) in your G Code

look ahead at least 20 lines.

just a thought
alex
Title: Re: movement is not smooth
Post by: the_kop on December 22, 2013, 08:31:37 PM
I'm going to try.


Thank you
 udom.