Machsupport Forum

Third party software and hardware support forums. => PoKeys => Topic started by: machiner on October 07, 2013, 10:49:30 AM

Title: Load Status Display Question
Post by: machiner on October 07, 2013, 10:49:30 AM

Just wondering what the RED line is on the load display window . Not the device load status on the bottom of the main page but the little window from . . .top menu . . . 'Settings' - 'Display DeviceLoad Status' The yellow line reads 30-40 percent most times but the RED line reads in the 140 percent range , but it dips down to 20 percent from time to time ?


FYI, I don't think answer is in manuals. I have looked in all the manuals and searched on web. No results

Title: Re: Load Status Display Question
Post by: NeoTO on October 13, 2013, 04:46:06 AM

Hi, machiner

This dialog is for diagnosting problems. When required, the support team will ask you about the figures in this dialog.
The red line staying at 140% is normal.

Regards,
Matevž

Title: Re: Load Status Display Question
Post by: machiner on October 13, 2013, 08:00:56 AM

thank you