Machsupport Forum

Third party software and hardware support forums. => Third party software and hardware support forums. => Topic started by: Morb1lee on August 05, 2013, 09:57:40 PM

Title: Tormach w robotic arm
Post by: Morb1lee on August 05, 2013, 09:57:40 PM

Wondering if anyone has successfully integrated a tormach mill w a robotic arm? How did you do it and where would I start?

Title: Re: Tormach w robotic arm
Post by: BR549 on August 05, 2013, 10:18:41 PM

Tormach is a version all it's own you may want to check over at the Tormach site.

(;-) TP

Title: Re: Tormach w robotic arm
Post by: Morb1lee on August 07, 2013, 05:19:16 PM

Well is there a way to run a arm with Mach 3 on a separate computer and have them communicate?

Title: Re: Tormach w robotic arm
Post by: BR549 on August 07, 2013, 05:45:55 PM

YES it is possible but would require a lot of Plugin programing to pull it off.

Would be easier to talk to a PLC if it could do the job.

(;-) TP