Machsupport Forum
General CNC Chat => Show"N"Tell ( Your Machines) => Topic started by: cnc6977 on July 03, 2013, 08:35:33 PM
-
Hi, I've had a Dyna Myte 2400 given to me and its in need of repair. I'm thinking of just going with the retro to the mach 3 conversion. The post I found on here were quite old and was wondering if anybody still had any info on this mill. Any schematics or manuals would be a great help. I've gotten it to power up and the spindle runs fine but gets stuck when initializing. This mill has been up in storage for about 14yrs. I talked to my boss about buying and he decided just to hand it over. Not going to argue, great deal for me. Thanks again in advance for your help.
-
Pm me your email address. I have the service and operation manual. I also have a copy of dynacom.exe
-
I sent the p.m. let me know if you didn't get it. Also do you know anybody who might have a spare axis driver card? I would like to see if I can make this thing work before I make any upgrades. thanks
-
There should be a few around. Personally I don't remember what I did with mine. Hopefully someone here will chime in. Sent the manuals this afternoon.