Machsupport Forum
G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: javilop5 on June 20, 2013, 12:17:07 PM
-
Hi! My english is not veriy good but I going to try explain my problem. I want to do a lineal not interpolation with Mach3. Because so, my stepper motors will go faster than now. I think that there will exist any instructions in G-Code that I can do it or any option in Mach3. I thank you and I apologize for my English.
PD: I attached a picture with my problem.