Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: rogerolsonemail on June 14, 2013, 02:29:26 PM

Title: Missing pages from User Manual for Mach3 Mill
Post by: rogerolsonemail on June 14, 2013, 02:29:26 PM

 ???  Having a problem with limit switches.  The manual index points me to section 6-11.  There is no section 6-11 in manual I down loaded yesterday.  Also looking for section 10-23.  Can anyone point to resources for manually overriding all of my limit switches.  All of my axis x,y, &z are sitting on their limit switch.  Can not move any axis... very frustrating.
rog

Title: Re: Missing pages from User Manual for Mach3 Mill
Post by: Hood on June 14, 2013, 05:13:53 PM

What manual did you download?
Hood

Title: Re: Missing pages from User Manual for Mach3 Mill
Post by: cjmerlin on June 14, 2013, 06:33:53 PM

Mach3-Settings page (ALT6) on the left there is the button Override Limits.



Hope this helps.

Title: Re: Missing pages from User Manual for Mach3 Mill
Post by: GBowes on June 14, 2013, 09:50:33 PM

I see you already received a good answer but thought I would add the following for anyone else looking at this thread.
The index in the Mach3 Manual refers to Section-Page numbers. 6-11 is page 11 in section 6
See section 6.2.14.2 on page 6-11 for limit overrides

Title: Re: Missing pages from User Manual for Mach3 Mill
Post by: rogerolsonemail on June 19, 2013, 11:22:04 AM

 :)
Thanks all.
you are a great help.
rog