Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: comet on February 16, 2007, 03:38:50 PM

Title: rotary dro
Post by: comet on February 16, 2007, 03:38:50 PM

Hi,
   Hi Im trying to build a gyroscope using quadrilatiure encoders for positioning.
  could someone point me towards a freebe software which can act as a dro ,
via the parallel port.
I know i can do this within mach but Im looking for something really basic.
It will also need to work with XP,and not throw up a DOS type screen.
   Cheers
   Tony

Title: Re: rotary dro
Post by: Hood on February 16, 2007, 03:46:45 PM

Why not just Use Mach and make up a very simple screen with only the functions/buttons/dros that you require.
Hood

Title: Re: rotary dro
Post by: comet on February 16, 2007, 04:23:52 PM

Hood,
    thyat was my first thought,but there are a number of other functions(video)
to run at the same time.plus I dont need a pulse engine running.
Prehaps it wont make any difference?
  Tony