Machsupport Forum

Third party software and hardware support forums. => Newfangled Mill Wizard => Topic started by: cncalex on April 06, 2013, 05:19:32 PM

Title: Metric units In drill cycle not metric in Z
Post by: cncalex on April 06, 2013, 05:19:32 PM

Hi Ron,
while playing around with the wizard demo I found this.

The Z depth of both the circular pocket and the hole circle is the same in the settings.
X and Y is OK but Z seems to be inches in all drill operations. (screenshot)

BTW I really like the clean easy to use design.

Regards
Alex

Title: Re: Metric units In drill cycle not metric in Z
Post by: Ron Ginger on April 06, 2013, 09:15:53 PM

That is a bug in the toolpath display, the gcode will be correct. The toolpath is the same code as used in the mach4 product, and it will get fixed before Mach4 is released.