Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: davidimurray on February 06, 2007, 04:51:38 PM

Title: Mastercam X Lathe Post processor
Post by: davidimurray on February 06, 2007, 04:51:38 PM

Has anyone used Chris Krstanovics V9 post processor in mastercam X. It behaving very oddly as for roughing work it is fine, however when I put a finish path in, all the arcs are in the wrong direction (but not in the roughing pass!!!). Anyone else had this problem or got a post that wrosk?

Cheers

Dave

Title: Re: Mastercam X Lathe Post processor
Post by: MarkGerard363 on July 25, 2014, 12:47:58 PM

Beside the arcs in the wrong direction they seem to me like if they are the other or missing side of the circumference!
Sadly so far I have not been able to use not even a single of the G-Codes generated by Master-cam, it is most that obvious that when I run all my tool paths in the simulation on the computer with master cam every thing works perfectly! but when ever I transfer those G-Codes to my late computer! all hell brake loose! if you have any kind of success please share it with us! I hope that I can hear soon from some one here!