Machsupport Forum

Mach Discussion => Mach Screens => Topic started by: Kenneth on February 14, 2013, 02:42:27 PM

Title: labels incorrect in mach3
Post by: Kenneth on February 14, 2013, 02:42:27 PM

i have machscreen 1.56 and made a .set. in it i have a MDI label.
near there is an inch/mm toggle. when i open mach3 the MDI label reads
inches. if i toggle the inch/mm button, it changes to mm's. every now and then
it will read right(MDI)
Thanks for any help

Title: Re: labels incorrect in mach3
Post by: Kenneth on February 14, 2013, 02:47:20 PM

this is a picture


(http://)

Title: Re: labels incorrect in mach3
Post by: Kenneth on February 25, 2013, 07:46:50 AM

am i in the wrong foum for machscreen or mach3 ?
Thanks

Title: Re: labels incorrect in mach3
Post by: Chaoticone on February 25, 2013, 09:42:04 AM

I would have to look at it in a screen designer to be doing anything but guessing.

Brett

Title: Re: labels incorrect in mach3
Post by: Kenneth on February 25, 2013, 10:15:15 AM

Thanks Chaoticone

Title: Re: labels incorrect in mach3
Post by: Klaus1311 on February 26, 2013, 04:30:12 AM

Hi Kenneth,

as Brett said, we would need to have your screenset file to have a deeper look at it. If you would email it, I'll have a look at it.
My email  addr: klaus.dietz (at) kd-dietz.de

Klaus

Title: Re: labels incorrect in mach3
Post by: Kenneth on February 26, 2013, 05:41:15 AM

i emailed the file Klaus

Title: Re: labels incorrect in mach3
Post by: Kenneth on February 26, 2013, 05:58:18 AM

when i use the "auto enlage screen" i get what you said Brett.
just don't know how to remove the extras in machscreen.
even enlarging the frame doesn't show anything.


Kenneth