Machsupport Forum

Mach Discussion => VB and the development of wizards => Topic started by: tr5t500 on January 30, 2013, 02:33:00 PM

Title: Shape 2D.v2 Wizard
Post by: tr5t500 on January 30, 2013, 02:33:00 PM

Regarding the Shape 2d Wizard. It asks for number of sides, radio dimension,origin and angle. I can't see where one adds the -z value and step down value. Also cutter size to be used ( offset value).

Any advice would be apprecieted.

John.

Title: Re: Shape 2D.v2 Wizard
Post by: BR549 on January 30, 2013, 03:06:53 PM

YO add that info from the main page.

(;-) TP