Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: hkstaub2 on January 21, 2013, 08:19:21 PM

Title: Old Guy Needs More Help
Post by: hkstaub2 on January 21, 2013, 08:19:21 PM

How come I can not use the keys or drop down to move the machine.  There is something simple I am sure.  All electric is hooked up.  This has happened a couple times and I have been able to get out of it but I am stuck. Please help me out.

OG

Title: Re: Old Guy Needs More Help
Post by: Overloaded on January 21, 2013, 08:24:14 PM

Do you have jogging enabled ?
Toggles on and off from the Run screen (Mill).

Russ

Title: Re: Old Guy Needs More Help
Post by: hkstaub2 on January 21, 2013, 08:40:01 PM

I thought I did but I will have to go and check.  Let you know.  Thanks

Title: Re: Old Guy Needs More Help
Post by: hkstaub2 on January 21, 2013, 10:43:17 PM

OK I am fixed for the moment.  This is the jog toggle under the Tool info block.  If I turn it off I can not move around. If I make it go green then I can. Thanks for that.