Machsupport Forum

Third party software and hardware support forums. => PoKeys => Topic started by: RDB on January 21, 2013, 01:54:40 PM

Title: Odd Z Home Invert Direction settings behavior.
Post by: RDB on January 21, 2013, 01:54:40 PM

Hi all,
I have my home direction invert turned ON for Z axis and it works when referencing home within Diagnostics or Program Run.  When going back into Configure Pokeys56E - Pulse Engine Settings the check box for Invert Home on the Z axis is OFF  ???.  I didn't turn it off anywhere.  This only seems to happen after I've done a Ref home command from either Diagnostics or Program Run n for any axis.   If I just open the Pulse Engine Settings tab over and over, the invert home box remains ticked on.

Title: Re: Odd Z Home Invert Direction settings behavior.
Post by: borisz on January 28, 2013, 01:25:03 AM

We will check these and try to recreate problem.
Can you please send Mach and PoKeys configuration file to: support@poscope.com