Machsupport Forum

Mach Discussion => VB and the development of wizards => Topic started by: Tony Bullard on January 21, 2013, 01:48:24 PM

Title: DoOemButton(138) / G28
Post by: Tony Bullard on January 21, 2013, 01:48:24 PM

I'm running two machines. One on XP and the other on W2000. Mach Version R3.043.066 on both

Both run G28 as Z home then X and Y together to home.

On XP DoOemButton(138) sends Z home then X then Y.

On W2000 DoOemButton(138) sends X home then Y then Z.

Can you suggest a fix to this?

Thanks for any help.
Tony

Title: Re: DoOemButton(138) / G28
Post by: ger21 on January 21, 2013, 10:29:14 PM

One PC has SafeZ enabled, and one doesn't?

Title: Re: DoOemButton(138) / G28
Post by: Tony Bullard on January 22, 2013, 07:18:20 AM

Thank you Gerry.
 It's people like you that make this forum such a great resource for the Mach community.
Keep up the good work.

Tony