Machsupport Forum

G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: viz on January 04, 2013, 05:07:25 AM

Title: Problem with Arcs
Post by: viz on January 04, 2013, 05:07:25 AM

Hi, my tool diameter is D6mm.

If in program i make radius on corner R3, mach3 don't understand how to do it. Here is attached screen.
Green dots are the way my tool is going by.
If i make my corners with radius R3.1 everything works fine. Cam program is sheetcam.

Title: Re: Problem with Arcs
Post by: Graham Waterworth on January 04, 2013, 09:04:03 AM

you can not have a G02 or G03 with a radius of zero, if you tell Mach3 your tool is 2,999mm it will work.