Machsupport Forum

Mach Discussion => Brains Development => Topic started by: Johnny Storm on December 03, 2012, 10:58:36 PM

Title: TIMER for activate an OUTPUT
Post by: Johnny Storm on December 03, 2012, 10:58:36 PM

Hello, I need a BRAIN to do this:

When I activate the OUTPUT1....
The brain sleep 2 seconds...
then activate the OUTPUT2 and keep ON until the OUTPUT1 is OFF

Any suggestion?

I tried with a timer but the OUTPUT2 turns ON when I activate the OUTPUT1.... 2 seconds after the OUTPUT 2 turn OFF

Title: Re: TIMER for activate an OUTPUT
Post by: Ya-Nvr-No on December 04, 2012, 07:02:58 AM

Worked is simulation mode
You will have to change the input to what you want.

Title: TIMER for activate an OUTPUT
Post by: Johnny Storm on December 04, 2012, 09:10:00 AM

Thank you it's working!