Machsupport Forum

Mach Discussion => General Mach Discussion => Topic started by: eelmans on November 23, 2012, 01:14:16 AM

Title: toolpath is incomplete
Post by: eelmans on November 23, 2012, 01:14:16 AM

Mach3 v3.043.022  and  v3.043.053   is displayed in the toolpath is incomplete.
And while the gcode in Mach3 v2.63 is displayed complete.
What should I do to fix this problem?

Title: Re: toolpath is incomplete
Post by: Tweakie.CNC on November 23, 2012, 02:12:33 AM

Hi and welcome to the forum.

Purchasing the Mach3 licence will solve your problem http://www.machsupport.com/purchase.php

Tweakie.

Title: Re: toolpath is incomplete
Post by: RICH on November 23, 2012, 07:54:12 AM

eelsmans,

YOU ARE USING A PIRATED MACH VESION. WE DON'T CONDONE OR "SUPPORT" THAT ACIVITY.
PIRATED VERSIONS WILLL NOT WORK PROPERLY THUS YOU ARE WASTING OUR GOOD WILL AND YOUR TIME ALSO.

YOU WILL RECIEVE NO SUPPORT FROM THIS SITE UNTIL YOU START USING THE DEMO OR PURCHASE THE SOFTWARE.

RICH