Machsupport Forum
G-Code, CAD, and CAM => G-Code, CAD, and CAM discussions => Topic started by: instaman on November 17, 2012, 10:21:06 AM
-
Can anyone help?
I am very new to cnc and is busy building a hotwire foam cutter. I am using a TB6560AHQ 4 -Axis controller (X,Y,Z & A outputs) with four motors driving the X & Y axis. I managed to get X & A to slave but don't know how to slave the Z-Axis on Y?
Anybody that can help?
-
Not to worry,got it working
-
But how? I have the same problem.