Machsupport Forum

Mach Discussion => Brains Development => Topic started by: Bill_O on November 12, 2012, 01:05:30 PM

Title: input steady to trigger
Post by: Bill_O on November 12, 2012, 01:05:30 PM

i have an input that a brain is constantly looking at.
i only want the output of the brain to be triggered if the button is pressed for an extended amount of time (0.1 sec)
how do i do this?

bill

Title: Re: input steady to trigger
Post by: Bill_O on December 07, 2012, 02:52:25 PM

thanks adam but how do i accomplish this in a brain?

bill

Title: Re: input steady to trigger
Post by: poppabear on December 09, 2012, 01:51:00 AM

Hey Bill, use the timer funciton

scott

Title: Re: input steady to trigger
Post by: Bill_O on December 10, 2012, 08:06:08 AM

scott,
i tried but must be writing it wrong
bill

Title: Re: input steady to trigger
Post by: poppabear on December 10, 2012, 08:30:16 PM

ok Bill,

Here is a brain that does what you want, when "Input1" turns on, (and stays on) for more than 1 second (see timer settings), then the output
turns on and will stay on until the input is released.

scott

Title: Re: input steady to trigger
Post by: Bill_O on December 11, 2012, 07:48:20 AM

scott,
once again you pull my *&^ out of the fire.
thanks
bill

Title: Re: input steady to trigger
Post by: poppabear on December 11, 2012, 08:09:59 PM

Hey Bill,

   Can you give me a call on the phone, I do need to talk to you about a horse.......

My cell after 9am eastern if you could.....

Scott